After you are finished, press the [ESC] key to exit the setup menu.
56
Press the [MENU] key to display the setup menu.
To restore all settings on the YC Camera application setup menu to their initial factory defaults
1
2 Press the [T] key to move the highlighting to “USB” and then press the [ENTER] key.
3 Press the [T] key once to move the highlighting to “Setup” and then press the [ENTER] key.
zThis will display the YC Camera application setup menu.
4 Press the [T] key to move the highlighting to “Initialize YC Camera Setup” and then press the [ENTER] key.
zThis displays the dialog box shown below.
5 Use the [S] key to select “Yes”.
6 To restore all the settings to their initial defaults, press the [ENTER] key.
zTo exit the operation without doing anything, press [ESC] instead of [ENTER].
7