Connecting a USB Card Reader to the Data Projector

1

2

Turn on the Data Projector.

zWait until the Data Projector’s POWER/STANDBY indicator is lit green.

Connect the USB card reader to the Data Projector USB port.

3 Load the memory card that contains the data you want to project with Viewer into the card slot of the USB card reader.

zFor details about how to load a memory card into the USB card reader, see the user documentation that comes with the reader.

zAfter the Data Projector detects the loaded memory card, it will start up Viewer automatically and display a menu of files (page 30) or menu of drives (page 29) on the memory card.

Note

zViewer will not start up automatically if the Data Projector’s plug-and-play feature is turned off. In this case, you will need to press the [INPUT] key to switch the input source to the memory card. For more details about the plug-and-play setting, see “Setup Menu Contents” in the User’s Guide.

zOnly files of formats that are recognized by the Data Projector (jpg, jpeg, jpe, bmp, avi, mp4) appear in the file menu. Note that even if a file appears in the file menu, it does not mean that the file can be displayed or played back by the Data Projector.

zThe file menu displays USB memory device contents in the following sequence: folders, movie files, image files. For details about how to play back a movie file, see “Using Viewer to Play a Movie” (page 39).

28