Safety Alert Symbols
Safety Precautions
Dear Customer
Thank you for using this product. For better understanding of this user manual and safe use of the product, please make sure the safety messages following these safe symbols are observed:
| A Prohibition symbol indicates actions that are likely to |
| cause product damage or personal injury and therefore |
Prohibition | are prohibited. |
|
|
| A Warning symbol indicates information related to |
Power supply: AC 220~240V/50HZ
If the voltage fluctuates violently (beyond 187~242V), consult a qualified electrician to prevent startup failure, damaged control board or compressor, or unusual noise.
OOMs
RMe ò
The appliance must be plugged into a dedicated socket that is earthed securely.
The power cord of this appliance is fitted with the
the third prong. The refrigerator should be located so that the plug is accessible. WARNING! The plug should be securely connected to the socket or otherwise it
may cause | a fire hazard. |
> | product safety and personal injury, and instructions |
Warning | following this symbol should be immediately observed. |
|
> >
>A Caution system indicates information related to product safety and personal injury and instructions following this
Caution | symbol should be observed. |
Be careful not to damage the power cord.
Always pull at the plug and not the cord itself to disconnect the appliance from the socket.
Route the power cord in a way to eliminate the risk of damage caused by the weight of refrigerator.
Be careful not to damage the power cord when moving the appliance away from the wall.
When the power cord is damaged
The use of cracked cord or worn plug is strictly prohibited. If the power cord is damaged, it should be replaced by an authorised service engineer.
If there is a gas leakage Shut off the gas valve.
Open the doors and windows for ventilation.
Do not plug or unplug the refrigerator or other electric appliances.
Always remember to unplug
the appliance in the following cases:
Unplug the appliance before cleaning and reparation.
Unplug the appliance before replacing the old light bulb to prevent electric shock.
>>
3 | 4 |