Location
This cooker has class “2/1” overheating protection so that it can be installed next to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas hob cook- top, a gap of at least 200 mm must be left between the side of the cooker and the fur- niture.
The furniture walls adjacent to the cooker must be made of material resistant to heat. The veneered synthetic material and the glue used must be resistant to a temperature of 90°C in order to avoid ungluing or deformations.
The cooker may be located in a kitchen, a kitchen/diner or
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below.
The cooker must be installed by a qualified technician and in compliance with local safety standards.
If the cooker is located on a pedestal it is necessary to provide safety measures to pre- vent falling out.
650 mm
500 | mm |
|
450 mm |
|
200 | mm |
|
Fig. 27
29
