Electronic clock (fig. 5)
The programmer is equipped with an electronic clock with lighted numbers which indicate hours and minutes.
Upon immediate connection of the oven or after a blackout, three zeroes will flash on the programmer panel.
To set the hour it is necessary to push
the 
button and then the 
or 
button until you have set the exact hour (fig. 5).
Alternatively, simultaneously push the
two buttons and at the same time push the 
or 
button.
Note: Setting the clock deletes any pro- gramme.
Normal cooking without the use of the programmer
To manually use the oven, that is, without the aid of the programmer, it is necessary to cancel the flashing AUTO by pushing
the button 
(AUTO will be switched off and the symbol 
will go on - Fig. 6).
Attention: If the AUTO is not flashing (which means a cooking programme has already been inserted), by pushing the
button 
you have cancelled the pro- gramme and switched to manual.
Electronic timer
The timer programme consists only of a buzzer which may be set for a maxi- mum period of 23 hours and 59 min- utes.
If the AUTO is flashing push the button.
To set the time, push the 
button
and the 
or 
until you obtain the desired time (fig. 7).
Having finished the setting, the normal time will appear on the panel and the 
symbol will appear.
The countdown will start immediately and may be seen at any moment on the panel by simply pressing the button 
.
At the end of the time, the 
symbol will be switched off and an intermittent buzzer will go off; this can be stopped by pressing any one of the buttons.
Altering the audible signal
By pressing the 
button you can choose from three variations.
Fig. 6
A
U
T
O
Fig. 7
8
