CDA RC 9620 manual Thermostat Knob fig, Function Selector knob fig, Oven Light, Recommended for

Models: RC 9620

1 36
Download 36 pages 46.75 Kb
Page 15
Image 15
Thermostat Knob (fig. 20)

15

Thermostat Knob (fig. 20)

This only sets the cooking temperature and does not switch the oven on. Rotate clockwise until the required temperature is reached (from 50 to 250°C).

The light between the thermostat and the function selector will illuminate when the oven is switched on and turns off when the oven reaches the correct temperature.

The light will cycle on and off during cooking in line with the oven temperature.

Fig. 20

Fig. 21

Function Selector knob (fig. 21)

Rotate the knob clockwise to set the oven for one of the following functions.

Oven Light

By setting the knob to this position, only the oven light comes on.

It remains on in all the cooking modes.

Function Selector knob (fig. 21) Traditional Convection Cooking

The upper and lower heating elements come on. The heat is dispersed by natural convection and the temperature must be set to between 50° and 250°C via the thermostat knob.

The oven must be preheated before cooking.

Recommended for:

Food that requires the same degree of cooking both inside and out, for example roasts, spare pork ribs, meringues etc.

Page 15
Image 15
CDA RC 9620 Thermostat Knob fig, Function Selector knob fig, Oven Light, Traditional Convection Cooking, Recommended for