CDA RC 9620 Location, The appliance must be housed in heat resistant units, For The Installer

Models: RC 9620

1 36
Download 36 pages 46.75 Kb
Page 28
Image 28
FOR THE INSTALLER

28

FOR THE INSTALLER

Location

The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space containing a bath or a shower.

The appliance must not be installed in a bed-sitting room of less than 20 m3.

The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment.

Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have.

Important

The appliance should be installed by a qualified electrician in compliance with the laws in force in your country and in observation of the instructions supplied by the manufacturer.

Failure to comply with this condition will render the guarantee invalid.

Always disconnect the cooker from mains power supply before carrying out any maintenance operations or repairs.

The cooker must be installed no less than 50 mm away from any side wall which exceed the height of the cooktop;

The appliance must be housed in heat resistant units.

The walls of the units must be capable of resisting temperatures of 75 °C above room temperature.

Do not install the appliance near inflammable materials (eg. curtains).

If the cooker is located on a pedestal it is necessary to provide safety measures to prevent falling out.

 

750 mm

450mm

 

 

50 mm

500

mm

 

 

 

 

 

Fig. 30

Page 28
Image 28
CDA RC 9620 manual Location, The appliance must be housed in heat resistant units, For The Installer