27
Replacing the Halogen Oven Light
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
–Let the oven cavity and the heating elements to cool down;
–Switch off the electrical supply;
Top Right Lamp:
–Remove the protective cover C (fig. 16);
–Replace the halogen lamp B with a new one suitable for high temperatures having the following specifications: 230V and same power (check watt power as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from your fingers can cause premature failure. Always use a clean cloth or gloves.
–Refit the protective cover;
Models:
SV100..
SV150..
6Q5..
Left Lamp (Model "6Q5.." Only):
–Remove the left wire rack by unscrewing the fixing screws.
–Press down from the top the protective cover A (fig. 16) and remove it by rotating on the lower side. IMPORTANT: never use screwdrivers or other utensils to remove the cover A. This could damage the enamel of the oven or the lampholder. Operate only by hands.
–Replace the halogen lamp B with a new one suitable for high temperatures having the following specifications: 230V and same power (check watt power as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from your fingers can cause premature failure. Always use a clean cloth or gloves.
–Refit the protective cover A operating in reverse order.
ATTENTION: the notch in the inner edge of the cover must be oriented toward the lamp.
–Assemble the left wire rack.
Note: Oven bulb replacement is not covered by your guarantee.
Model:
6Q5..
WRONG
CORRECT
1
A
2 | A | B | A | B | C |
Fig. 16
