Manuals / Brands / Computer Equipment / Server / Celestron / Computer Equipment / Server

Celestron AP8000 • 4-1.Opening the Chassis, Chassis Panels, Opening the Left, Panel, Fan, Replacement

1 44

Download 44 pages, 1.11 Mb

IV. Hardware Setup

• 4-1. Opening the Chassis

Chassis Panels

There are two identical side panels on the chassis, one on each side. Each panel is secured by two screws on the back of the server (as circled) and also by a CAM.

Opening the Left

Panel

The CAM has a rotating knob with its own keylock. Turn the knob counterclockwise to release and clockwise to secure. The keylock can be used to keep the knob from being turned by unauthorized people.

Fan

Replacement

The fan arrary module can be removed by pulling out the handle and using the handle to remove the entire module. The handle must be in the out position to insert the fan module. The individual fans are secured by two clips and two hooks. To release these clips, use a screw driver to push these clips in and then slide the fan out.

NOTE: The fan array module may be removed first for easier motherboard instal-

lation or removal.

Opening the Chassis

IV. Hardware Setup

AP8000 Hardware Reference Guide

Contents

Page AP8000 Hardware Reference Guide ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) I. Introduction II. Components III. Basic Operation IV. Hardware Setup Page Federal Communications Commission Statement Canadian Department of Communications Statement •1-1.How this Manual is Organized Symbols •1-2.Component Checklist Standard components Optional components •1-3.Features •1-4.Safeguards Operation Safety Tools Required •1-5.Electrical Safety Static-SensitiveDevices (This page was intentionally left blank.) •2-1.Server Front Side •2-2.Server Back Side •2-3.Server Left Side •3-1.Starting the Server • 3-2.LED Indicators • 3-3.BIOS Setup • 4-1.Opening the Chassis Chassis Panels Opening the Left Panel Fan • 4-2.Motherboard Spacers Install the Baseboard Screws Device Cables Cable Connections • 4-3.Central Processing Unit (CPU) Install Retention Mechanisms Mechanism Brace Bars Install Cartridge Lifters Mechanism Cap Frame • 4-4.Chassis Intrusion Switch Chassis Intrusion Connector • 4-5.Expansion Cards • 4-8.Fixed Storage Devices Fixed Storage Device Tray Fixed Device Bay Cover Clips • 4-7.Floppy Disk Drive and CD-ROM Floppy Disk Drive CD-ROMDrive • 4-8. Hot-SwapTrays Removing Hot Swap Trays Hot-SwapTray Usage Hot-SwapTray Front Connections Hot-SwapTray Interface • 4-9. Hot-SwapTray Connector Board Hot-SwapTray Rear Connections • 4-10.SCSI Backplane • 4-11.SCSI ID Setting Using the SCSI Backplane Boards Separately Using Cascaded SCSI Backplane Boards • 4-12.SCSI Backplane Board Placement Installing & Removing SCSI Backplane Boards SCSI Hard Disk Connections • 4-13.Circulation System Fan Module • 4-14.Power Supply Redundant Power Supply Mounting Removing Removing the Entire Power Supply Unit Power Module Rating Power Module Failure Power Supply Information Power Supply Requirement Page i.SCSI Cable Limits ii. Glossary PCI Bus (Peripheral Component Interconnect Local Bus) Peripherals POST (Power On Self Test) PS/2 Port RAID (Redundant Array of Inexpensive Disks)