Manuals / Brands / Computer Equipment / Server / Celestron / Computer Equipment / Server

Celestron AP8000 Removing the, Entire Power, Supply Unit, NOTE:

1 44

Download 44 pages, 1.11 Mb

Setup Hardware .IV

Supply Power

IV. Hardware Setup

Removing the

Entire Power

Supply Unit

Remove the two boxed screws, slide out the power supply modules with the support brace to the insertion position and then remove the two circled screws.

	NOTE: A long screw-
	driver is required to reach
Screwdriver	into the chassis.

After the support brace is re- moved, the power supply modules and the frame can be removed from the chassis.

Power Supply Frame

IMPORTANT

When installing the power supply, reverse the steps: Insert the power supply modules halfway into the chassis, secure the circled screws, push the power supply modules in place, secure the boxed screws as well and the 8 screws on the back of the chassis, and then connect the power cord.

36	AP8000 Hardware Reference Guide

Contents

Page AP8000 Hardware Reference Guide ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) I. Introduction II. Components III. Basic Operation IV. Hardware Setup Page Federal Communications Commission Statement Canadian Department of Communications Statement •1-1.How this Manual is Organized Symbols •1-2.Component Checklist Standard components Optional components •1-3.Features •1-4.Safeguards Operation Safety Tools Required •1-5.Electrical Safety Static-SensitiveDevices (This page was intentionally left blank.) •2-1.Server Front Side •2-2.Server Back Side •2-3.Server Left Side •3-1.Starting the Server • 3-2.LED Indicators • 3-3.BIOS Setup • 4-1.Opening the Chassis Chassis Panels Opening the Left Panel Fan • 4-2.Motherboard Spacers Install the Baseboard Screws Device Cables Cable Connections • 4-3.Central Processing Unit (CPU) Install Retention Mechanisms Mechanism Brace Bars Install Cartridge Lifters Mechanism Cap Frame • 4-4.Chassis Intrusion Switch Chassis Intrusion Connector • 4-5.Expansion Cards • 4-8.Fixed Storage Devices Fixed Storage Device Tray Fixed Device Bay Cover Clips • 4-7.Floppy Disk Drive and CD-ROM Floppy Disk Drive CD-ROMDrive • 4-8. Hot-SwapTrays Removing Hot Swap Trays Hot-SwapTray Usage Hot-SwapTray Front Connections Hot-SwapTray Interface • 4-9. Hot-SwapTray Connector Board Hot-SwapTray Rear Connections • 4-10.SCSI Backplane • 4-11.SCSI ID Setting Using the SCSI Backplane Boards Separately Using Cascaded SCSI Backplane Boards • 4-12.SCSI Backplane Board Placement Installing & Removing SCSI Backplane Boards SCSI Hard Disk Connections • 4-13.Circulation System Fan Module • 4-14.Power Supply Redundant Power Supply Mounting Removing Removing the Entire Power Supply Unit Power Module Rating Power Module Failure Power Supply Information Power Supply Requirement Page i.SCSI Cable Limits ii. Glossary PCI Bus (Peripheral Component Interconnect Local Bus) Peripherals POST (Power On Self Test) PS/2 Port RAID (Redundant Array of Inexpensive Disks)