Manuals / Brands / Computer Equipment / Server / Celestron / Computer Equipment / Server

Celestron AP8000 • 4-12.SCSI Backplane Board Placement, Installing & Removing SCSI Backplane Boards

1 44

Download 44 pages, 1.11 Mb

IV. Hardware Setup

• 4-12. SCSI Backplane Board Placement

Setup Hardware .IV

Board Backplane SCSI

Installing & Removing SCSI Backplane Boards

There are three screws on each side of the SCSI backplane board as shown by the arrows. Both sides of the chassis side panels must be removed to access these screws. Please note that notches on the top and bottom of the SCSI backplane board must be placed as shown in order to properly seat the SCSI backplane boards into the chassis. The SCSI backplane boards will only fit in one orientation but may be interchanged between the top and bottom half. Check the SCSI ID DIP setting of each SCSI backplane board before using.

32	AP8000 Hardware Reference Guide

Contents

Page AP8000 Hardware Reference Guide ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) I. Introduction II. Components III. Basic Operation IV. Hardware Setup Page Federal Communications Commission Statement Canadian Department of Communications Statement •1-1.How this Manual is Organized Symbols •1-2.Component Checklist Standard components Optional components •1-3.Features •1-4.Safeguards Operation Safety Tools Required •1-5.Electrical Safety Static-SensitiveDevices (This page was intentionally left blank.) •2-1.Server Front Side •2-2.Server Back Side •2-3.Server Left Side •3-1.Starting the Server • 3-2.LED Indicators • 3-3.BIOS Setup • 4-1.Opening the Chassis Chassis Panels Opening the Left Panel Fan • 4-2.Motherboard Spacers Install the Baseboard Screws Device Cables Cable Connections • 4-3.Central Processing Unit (CPU) Install Retention Mechanisms Mechanism Brace Bars Install Cartridge Lifters Mechanism Cap Frame • 4-4.Chassis Intrusion Switch Chassis Intrusion Connector • 4-5.Expansion Cards • 4-8.Fixed Storage Devices Fixed Storage Device Tray Fixed Device Bay Cover Clips • 4-7.Floppy Disk Drive and CD-ROM Floppy Disk Drive CD-ROMDrive • 4-8. Hot-SwapTrays Removing Hot Swap Trays Hot-SwapTray Usage Hot-SwapTray Front Connections Hot-SwapTray Interface • 4-9. Hot-SwapTray Connector Board Hot-SwapTray Rear Connections • 4-10.SCSI Backplane • 4-11.SCSI ID Setting Using the SCSI Backplane Boards Separately Using Cascaded SCSI Backplane Boards • 4-12.SCSI Backplane Board Placement Installing & Removing SCSI Backplane Boards SCSI Hard Disk Connections • 4-13.Circulation System Fan Module • 4-14.Power Supply Redundant Power Supply Mounting Removing Removing the Entire Power Supply Unit Power Module Rating Power Module Failure Power Supply Information Power Supply Requirement Page i.SCSI Cable Limits ii. Glossary PCI Bus (Peripheral Component Interconnect Local Bus) Peripherals POST (Power On Self Test) PS/2 Port RAID (Redundant Array of Inexpensive Disks)