Panasonic UF-6200 operating instructions Customizing Your Machine, Fax Parameter Table

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting		Comments
		Number
01	CONTRAST	1	NORMAL	Setting the home position of the CONTRAST key.
		2	LIGHTER
		3	DARKER
02	RESOLUTION	1	STANDARD	Setting the home position for the RESOLUTION.
		2	FINE
		3	S-FINE
		4	HALFTONE
			(FINE)
		5	HALFTONE
			(S-FINE)
04	STAMP (HOME)	1	OFF	Setting the home position of the STAMP key.
				To select the stamp function when document is stored in
		2	ON
				memory, see Fax Parameter No. 28.
05	MEMORY (HOME)	1	OFF	Setting the home position for memory transmission/copy
				mode. (This setting can be temporarily changed by using
		2	ON
				F8-9 (MEMORY XMT))
06	DIALING METHOD	1	PULSE	Selecting the dialing method.
		2	TONE
07	HEADER PRINT	1	INSIDE	Selecting the printing position of the header.
				INSIDE	: Inside TX copy area.
		2	OUTSIDE
				OUTSIDE : Outside TX copy area.
		3	NO PRINT	NO PRINT : Header is not printed.
08	HEADER FORMAT	1	LOGO, ID	Selecting the header format.
			NO.
		2	FROM TO
09	RCV'D TIME PRINT	1	INVALID	Selecting whether the machine prints the received date &
				time, remote ID, percentage of reduction and page number
		2	VALID
				on the bottom of each received page.
10	KEY/BUZZER	1	OFF	Selecting the volume of the Key/Buzzer tone.
	VOLUME
		2	SOFT
		3	LOUD
12	COMM. JOURNAL	1	OFF	Selecting the home position of printout mode for COMM.
				Journal Off/Always/INC.
		2	ALWAYS
				OFF	: Does not print
		3	INC. ONLY	ALWAYS	: Always prints
				INC. ONLY: Prints only when communication has failed.
13	AUTO JRNL PRINT	1	INVALID	Selecting whether the machine prints the journal
				automatically after every 32 transactions.
		2	VALID
17	RECEIVE MODE	1	TEL	Setting the receive mode.
		2	FAX
		3	FAX/TEL
			SW.
		4	TAM/FAX

36