Panasonic UF-6200 operating instructions Setting Comments Number, Sleep

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting		Comments
		Number
34	ENERGY SAVER	1	OFF	To reduce the power consumption in standby, select either
	MODE			Energy-Saver or Sleep mode and specify the Delay Time
		2	ENERGY-
				(1 to 120 minutes) for the machine to enter into the
			SAVER
				selected mode.
		3	SLEEP	The Delay Timer setting is only available in the Energy-
				Saver or Sleep Modes.
				OFF	: The unit will remain in standby mode
					and consume more energy than when
					in Energy-Saver or Sleep modes.
				ENERGY-SAVER:Saves energy by consuming less
					power than when in standby mode by
					turning off the fuser unit after the
					specified time.
				SLEEP	: This is the lowest power state that the
					machine enters after the specified time
					without actually turning off.
35	DAYLIGHT TIME	1	OFF	Set the Daylight Time according to your local regulation.
				OFF	: Daylight time is not applied.
		2	MAR 2nd
				MAR 2nd : From 2:00 AM on the 2nd Sunday in March to
		3	APR 1st		2:00 AM on the 1st Sunday in November.
				APR 1st	: From 2:00 AM on the 1st Sunday in April to
					2:00 AM on the Last Sunday in October.
36	RING PATTERN	1	INVALID	Selecting whether or not the machine is available for "DRD
	(DRD)			Service". If this parameter is set to "VALID", your machine
		2	VALID
				detects the specified ring pattern only when receiving a
				document automatically.
37	RCV TO MEMORY		(----)	Enter a 4-digit password used to print out the received
				document in memory by using F8-5 (RCV TO MEMORY).
				When F8-5 is set to ON, this parameter will not be shown
				on the LCD display. (See page 96)
38	ACCESS CODE		(----)	Enter a 4-digit Access Code to secure the machine from
				unauthorized use. (See page 94)
39	PIN CODE ACCESS	1	NONE	Selecting the access method (Prefix or Suffix) to dial a
				number with PIN Code. (See page 106)
		2	SUFFIX
		3	PREFIX
42	CONF. FILE SAVE	1	INVALID	Selecting whether the machine saves the confidential
				polled file even after the file is polled once.
		2	VALID
43	PASSWORD-XMT	1	OFF	Setting a 4-digit XMT-Password and selecting whether the
				machine performs and checks the XMT-Password of the
		2	ON
				receiving station when transmitting. (See page 111)
44	PASSWORD-RCV	1	OFF	Setting a 4-digit RCV-Password and selecting whether the
				machine performs and checks the RCV-Password of the
		2	ON
				transmitting station when receiving. (See page 112)
46	SELECT RCV	1	INVALID	Selecting whether the machine performs selective
				reception. (See page 109)
		2	VALID
47	REMOTE RCV	1	INVALID	Selecting whether or not the machine accepts remote
				reception command. (See page 67)
		2	VALID
48	TELEPHONE LINE	1	PSTN	Selecting the type of line connected.
		2	PBX
49	PSTN ACCESS CODE		(----)	Setting PSTN Access Code. (Up to 4 digits)

38