Panasonic UF-6200 operating instructions Substitute Memory Reception, Print Collation Mode

Receiving Documents

Substitute Memory Reception

If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically starts receiving documents in its image data memory. Stored documents are printed automatically after replacing the recording paper or the toner cartridge. (See Note 1 and 2)

1	When the machine finishes the memory reception and
	there is no recording paper or toner, an Information Code
	appears on the display.

NO RECORDING PAPER INFO. CODE=010

OUT OF TONER INFO. CODE=041

2	Install the recording paper (See page 20) or replace the
	toner cartridge (See page 18).
	The machine will automatically start printing the document
	stored in the memory.

* PRINTING *

MEMORY RCV’D DOC

Print Collation Mode

The printing mechanism of the machine features a Reverse Order Stacking construction. The machine has Print Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is enabled, all received documents are stored into the memory first, and then printed out in Correct Order Stacking. The requirements for the Print Collation Mode to be active are:

1)Fax Parameter No. 65 (PRINT COLLATION) set to “VALID”. (See page 39)

2)sufficient remaining memory

The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements is not met.

Sending Document Order

Stacking Document Order

1

2

3

Correct Order Stacking

(Collation Mode)

1

2

3

Reverse Order Stacking

(Non-Collation Mode)

3

2

1

NOTE

1.If the memory overflows, the machine will stop receiving and release the communication line. The document(s) stored in the memory up to that moment will be printed out.

2.If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 22 (SUBSTITUTE RCV) to "INVALID". (See page 37)

74