Panasonic UF-6200 operating instructions Wrong Transmission Prevention Function, Sending Documents

Sending Documents

Wrong Transmission Prevention Function

The following functions have been provided to prevent transmission to a wrong address.

These include the dial re-enter function to prohibit direct dialing or multiple addresses, and a function to confirm the address.

Direct Dial Restriction Function

This function prohibits all designations of addresses by direct dialing (Including manual transmission). This function operates if Fax Parameter “136 RESTRICT D. DIAL” of Fax Parameter set to “VALID”. (See page 40)

• If this function is set, even when telephoning from an external device, it is not possible to use direct dialing.

However, if direct dialing standby is displayed, press

Redial/Pause

to start redial.

If keypad or your display.

Redial/Pause

are pressed, the following message will appear on

DIRECT DIAL IS NOT AVAILABLE

Multiple Address Prohibit Function

With this device, it is possible to combine direct dialing and AUTO dialing, etc. to send the same document by fax to multiple addresses. If you do not wish to send to multiple addresses, set setting “117 MULTI STATION” of Fax Parameter set to “INVALID” and the system will be set to transmit to only one address. This is useful to prevent mistaken transmission to multiple addresses.

If you specify multiple addresses, the following message will appear on your display.

NOT AVAILABLE.

ONLY 1 STN PERMITTED

NOTE

1.If multiple address designation is set to “INVALID”, it is not possible to transmit to multiple addresses.

2.If multiple address designation is set to "INVALID", it is not possible to use group dial.

3.If multiple address designation is set to “INVALID”, it is possible to use the program dial in which multiple addresses are set.

54