Panasonic UF-6200 operating instructions Troubleshooting, Mode, Symptom, Cause / Action, page

Troubleshooting

Troubleshooting

Mode	Symptom		Cause / Action	page
Print Copy Quality	Vertical lines printing	Print out a Journal report (Ex: FUNCTION, 6, 1 , SET and 1)		125
	on the received	and check quality to make sure whether your machine has		18
	document	trouble.
		If Journal report quality is OK, your machine has no problem,
		report to the sending party that they have a problem.If copy is
		NG, replace the Toner Cartridge.
	Fuzzy print	1.	Make sure you are using the correct paper for the best	153
			possible print quality.
		2.	Try reversing the recording paper to the other side.
	Missing dots or lines/	1.	Make sure you are using the correct paper for the best	153
	inconsistent darkness		possible print quality.	18
	within print	2.	Replace the Toner Cartridge.
	Fading print	Your Toner Cartridge may be running out of toner. Replace		18
		the Toner Cartridge.
	Faint print	You may need to choose a different paper type for the best		153
		possible print quality.
Communication	No dial tone	1.	Check the connection of the telephone line.	150
		2.	Check the telephone line.
		1.	Check the connection of the telephone line.	150
	No auto answer	2.	Check the Reception mode setting.	66
		3.	If the Fax Parameter No. 13 (AUTO JRNL PRINT) is set to
			"VALID" (Default setting) and the machine is printing the
			received document from memory, which also happens to
			be the 32th transaction, the machine will not auto answer
			until the Transaction Journal completes printing.
	Cannot transmit or	An information code will be shown on the display. Refer to the		141
	receive	information code table to find out the trouble.
No Unit Operation	No unit operation	To reset the machine, unplug the Power Cord for a few		17
		seconds then plug it in again.

138