Panasonic UF-6200 operating instructions Junk FAX Filter

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting	Comments
		Number
125	CONFIRM STATIONS	1	INVALID	Set whether to confirm the destinations.
				When set to Valid the document cannot be sent unless the
		2	VALID
				destination is confirmed.
				This function also operates when the addresses are
				specified with Group Dialing or Program Dialing function.
				If an address has been altered (added or removed) when
				confirming addresses, the address confirmation message
				will appears again when transmitting the documents
				(pressing the start key).
133	JOB BUILD	1	OFF	Selecting whether the machine performs Job Build when
				the total number of documents exceeds the maximum
		2	ON
				capacity of the ADF, or when scanning the documents
				manually one at a time. If you place the documents on the
				ADF within 5 seconds after the ADF scan, the ADF scan
				will continue for the current scan. (Maximum number of
				scanning sheets is 255 pages for one job.)
				The Quick Memory Transmission feature (Fax Parameter
				No. 82) is not available when the Job Build is set to
				"2:ON".
				Up to 250 pages can be stored. When the number of
				pages exceeds 255, the memory overfull message will be
				displayed. Select “Yes“ to start transmitting, or “No“ to
				cancel.
				If no action is taken within 5 seconds, the machine will
				start transmitting the stored originals.
135	JUNK FAX FILTER			Function to prevent direct mail FAX and unnecessary FAX
				messages.
		01. JUNK FAX FILTER		When set to “VALID”, the machine will not receive the
				faxes from the senders whose numeric ID has been
		1	INVALID
				registered as a junk fax number. The denied number IDs
		2	VALID	can be registered in "04.ID NO. REGIST.".
		02. RCV WITHOUT ID		When set to “VALID”, the machine will receive faxes from
				senders without numeric ID registered.
		1	INVALID
				(This setting is available only when "01. JUNK FAX
		2	VALID	FILTER" is set to "VALID".)
		03. RECEIVED ID PRINT		When set to “VALID”, the sender’s numeric ID and
				received time are printed at the bottom of the received
		1	INVALID
				faxes. If the sender’s numeric ID is not registered, only the
		2	VALID	received time is printed. (This setting is available only
				when “01. JUNK FAX FILTER” is set to “VALID”.)
		04. ID NO. REGIST.		Register fax numbers as junk fax number.
		(NO. 01-30)		Up to 30 fax numbers can be registered for junk fax
				number. (Including numerals “0-9”, blank space, and +
				symbol.) (When comparing the sender's numeric ID to the
				registered junk fax numbers, blank spaces between
				numbers are ignored.)
136	RESTRICT D. DIAL	1	INVALID	Enable or disable the Restrict Direct Dial function.
				When set to “VALID”, manual input destination Tel No. and
		2	VALID
				“Redial” button are not accepted.

40