Panasonic UF-6200 User Parameters, General Description, Setting the Date and Time, 1 7 2

User Parameters

General Description

Your facsimile machine has several basic settings (User Parameters) to help you keep records of the documents you send or receive. For example, the built-in clock keeps the current date and time, and your LOGO and ID Number help to identify you when you send or receive documents.

Setting the Date and Time

At standby the display will show the date and time. Once the standby display is set, it will automatically be updated.

1 7 2 1

3

4	Enter the new date and time.
	Ex: 0 8 Month: August

12 Date: 12th

2 0 0 8 Year: 2008

1 5 0 0 Time: 3:00 PM

SET MODE (1-8)

ENTER NO. OR ∨ ∧

1:USER PARAMETERS? PRESS SET TO SELECT

DATE & TIME 8-12-2008 00:00

DATE & TIME 08-12-2008 15:00

If you made a mistake, use or to move the cursor over the incorrect number, then overwrite it with the correct one.

5

NOTE

1.The clock may occasionally require adjustment. (Lunar inequality : ±1 minute)

2.The clock of your machine is equipped with D.S.T. (Daylight Saving Time) system. Your clock will automatically set the time forward from 2:00 AM on the 2nd Sunday in March. At the end of the daylight saving time (on the 1st Sunday in November), the clock will set the time back from 2:00 AM. (Set the Daylight Time according to your local regulation.)

If your state does not use the D.S.T. system, change the Fax Parameter No. 35 (DAYLIGHT TIME) to "OFF" . (See page 38)

3.The current Date & Time must be set because it is required by the Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this Operating Instructions)

26