Panasonic UF-6200 operating instructions To send a Document with Sub-address, Sub-addressing, 2 Ex

Sub-addressing

To send a Document with Sub-address

Using One-Touch/ABBR. Number Dialing

The operation is the same as for normal dialing

1

Set document(s) face down.

2 Ex:

3

The document is stored into the memory and your machine starts to dial the number of the station and sends the document(s) with Sub-addressing information.

Using Manual Number Dialing

Use Flash/Sub-addrto separate the Telephone number and the Sub-address.

1

2		Set document(s) face down.
	Enter the telephone number, press							then
							Flash/Sub-addr
	enter the Sub-address (up to 20 digits).
	(Up to 36 digits including telephone number, pauses,
	spaces, FLASH and Sub-address)
	Ex: Telephone number = 5551234, Sub-address =2762
	Enter as: 5 5		5	1	2	3 4
			2	7	6	2
		Flash/Sub-addr

3

ENTER STATION(S) THEN PRESS START 00%

<01>(Station name) 5551234s2762

* STORE * NO.001

PAGES=001 01%

ENTER STATION(S) THEN PRESS START 00%

TEL. NO. 5551234s2762

* STORE * NO.001

PAGES=001 01%

The document is stored into the memory and your machine starts to dial the number of the station and sends the document(s) with Sub-addressing information.

NOTE

1.Flash/Sub-addrseparates the Sub-address from the Telephone number and is indicated by an "s" in the display.

2.Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.

3.The Sub-address is not transmitted during Manual Redial Mode.

124