PYROMASTER@ UVHB26 Vent-Free Heaters

DESCRIPTION

The UVHB vent-free heaters is designed to be installed into a FPS1212 or FPS1214 mantel

cabinet only. It may not be installed in any other manner.

GAS SPECIFICATIONS

Model Fuel Gas Control

Max. Min.

Input Input B.T.U.H. B.T.U.H.

UVHB26RN Natural MillivoltsHi/lo 26,000 18.200

The UVHB26 is available in Natural or Propane gas, equipped with an oxygen depletion sensor with a standing pilot.

UVHB26RP Propane MillivoltsHi/lo 26,000 19,500

Fig. 2. Gas spectications.

MINIMUM CLEARANCES

Minimum clearance to combustibles are main- tained when the UVHB26 is installed into the FPS1212 or FPS1214 mantel cabinets. Top of unit to ceiling minimum 42 inches.

. GAS SUPPLY PRESSURES

PLANNING

Planning the installation is an important first step: it will save time and money later in the actual installation. In planning the installation, consider:

1. Where the heater will be located.

'j

/

This heater must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure equal to or less than 1/2 psig (3.45 kPa).

2. All components needed to complete the

project.

'..,:,..' The heater and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.45 kPa).

 

NATURAL

LP

Inlet Minimum

4.5"W.e.

11"W.e.

Inlet Maximum

10.5" w.e.

13"W.e.

Input Adjustment

7.0"W.e.

11"W.e.

Manifold Pressure

3.5"W.e.

10"W.e.

Table 1. Gas supply pressures.

HIGH ELEVATION DERATING

Input ratings are shown in BTU per hour and are for elevations up to 4,500 (1370m) feet.

For elevations above 4,500 (1370m) feet, ratings should be reduced at the rate of four (4) percent for each 1,000 feet above sea level.

'\

,.'

coo.'"

5

Page 5
Image 5
CFM UVHB26 warranty Description, GAS Specifications, Planning, High Elevation Derating

UVHB26 specifications

The CFM UVHB26 is a cutting-edge vehicle equipped with advanced technology and features that elevate its performance and efficiency, making it a standout in the market. Designed for versatility and reliability, the UVHB26 caters to a wide range of applications including transportation, logistics, and utility services.

One of the key highlights of the CFM UVHB26 is its robust engine, which delivers a powerful performance while ensuring fuel efficiency. The vehicle employs a state-of-the-art turbocharged engine that not only enhances horsepower but also optimizes fuel consumption, making it an environmentally friendly option for modern-day driving. This engine is designed to tackle tough terrains and deliver consistent performance, ensuring that it meets the demands of various operational tasks.

The UVHB26 features an advanced all-wheel-drive system that provides superior traction across different surfaces. This system enhances stability and control, allowing drivers to navigate challenging environments with ease. The vehicle's suspension system is finely tuned to provide a smooth ride, even on rough roads, ensuring that cargo is transported safely and comfortably.

Safety is a paramount concern in the design of the CFM UVHB26. The vehicle is equipped with a comprehensive suite of safety technologies, including advanced braking systems, stability control, and multiple airbags. Additionally, an intuitive driver assistance system helps to enhance situational awareness, reducing the risk of accidents and ensuring a secure driving experience.

Another outstanding feature of the UVHB26 is its spacious interior and cargo capacity. The cabin is designed for comfort and functionality, with ergonomic seating arrangements that provide ample space for both drivers and passengers. The cargo area can be easily adapted to accommodate various loads, making the vehicle ideal for business use.

Incorporating modern connectivity features, the CFM UVHB26 is equipped with an infotainment system that supports smartphone integration, navigation, and communication tools. This ensures that drivers remain connected while on the move, enhancing productivity and convenience.

Overall, the CFM UVHB26 exemplifies innovation in vehicle design, combining powerful performance, safety, and technology to meet the diverse needs of its users. Whether for commercial or personal use, the UVHB26 delivers a dynamic driving experience and remains a reliable choice for those looking for a high-performance vehicle.