Operating Instructions, First Firing | CFM UVHB26 instruction

PYROMASTER@ UVHB26 Vent-Free Heaters

OPERATING INSTRUCTIONS

FIRST FIRING

Upon completing the gas line connection, a small amount of air will be trapped in the line. When first lighting the unit with pilot light, it will take a few minutes to purge the trapped air. Once purging is complete, the pilot and burner will light and oper- ate as indicated in the instruction manual. Subse- quent lightings of the appliance will not require purging.

When lit for the first time, the appliance will emit a slight odor for an hour or two. This is due to paint and lubricants used in the manufacturing process. After each lighting, vapor may condense and fog the glass; this moisture disappears in a few min- utes of burning.

. SAFETY PRECAUTIONS FOR

STANDING PilOT HEATERS

FOR YOUR SAFETY - READ THIS SECTION BEFORE LIGHTING!

repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

C. Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of this control system and any gas control which has been underwater.

LIGHTING INSTRUCTIONS FOR HONEYWELL

1.STOP! Read the safety information above.

2.To access the controls, Remove lower louvre.

3.Turn wall switch and wireless remote OFF (if used).

4.Push in gas control knob slightly and turn

clockwise ~ to OFF. See figure 10.

A WARNING: IF YOU DO NOT

FOllOW THESE INSTRUCTIONS

EXACTLY, A FIRE OR EXPLO- SION MAY RESULT CAUSING PROPERTY

DAMAGE, PERSONAL INJURY OR lOSS

OF LIFE.

A. BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to floor because some gas is heavier than air and will settle on the floor.

IF YOU SMELL GAS:

1.Do not try to light any appliance.

2.Do not touch electrical switches; do not

use any phone in your building.

3.Immediately call your gas supplier from a neighbor's phone. Follow your gas supplier's instructions.

4.If you cannot reach your gas supplier, call the fire department.

B.Use only your hand to push in or turn the gas valve control knob. Never use tools. If the

knob will not push in or turn by hand, don'ttry to

5.WAIT 5 MINUTES TO CLEAR OUT ANY GAS. If you then smell gas, STOP! Follow A in the safety information. If you do not smell gas, go to next step.

BLACK

JUMPER

~ w>-,,~=

PIEZO IGNITOR

HED

PILOT

FP829

Fig. 10. Honeywell valve and pilot assembly.

UVHB26 specifications

The CFM UVHB26 is a cutting-edge vehicle equipped with advanced technology and features that elevate its performance and efficiency, making it a standout in the market. Designed for versatility and reliability, the UVHB26 caters to a wide range of applications including transportation, logistics, and utility services.

One of the key highlights of the CFM UVHB26 is its robust engine, which delivers a powerful performance while ensuring fuel efficiency. The vehicle employs a state-of-the-art turbocharged engine that not only enhances horsepower but also optimizes fuel consumption, making it an environmentally friendly option for modern-day driving. This engine is designed to tackle tough terrains and deliver consistent performance, ensuring that it meets the demands of various operational tasks.

The UVHB26 features an advanced all-wheel-drive system that provides superior traction across different surfaces. This system enhances stability and control, allowing drivers to navigate challenging environments with ease. The vehicle's suspension system is finely tuned to provide a smooth ride, even on rough roads, ensuring that cargo is transported safely and comfortably.

Safety is a paramount concern in the design of the CFM UVHB26. The vehicle is equipped with a comprehensive suite of safety technologies, including advanced braking systems, stability control, and multiple airbags. Additionally, an intuitive driver assistance system helps to enhance situational awareness, reducing the risk of accidents and ensuring a secure driving experience.

Another outstanding feature of the UVHB26 is its spacious interior and cargo capacity. The cabin is designed for comfort and functionality, with ergonomic seating arrangements that provide ample space for both drivers and passengers. The cargo area can be easily adapted to accommodate various loads, making the vehicle ideal for business use.

Incorporating modern connectivity features, the CFM UVHB26 is equipped with an infotainment system that supports smartphone integration, navigation, and communication tools. This ensures that drivers remain connected while on the move, enhancing productivity and convenience.

Overall, the CFM UVHB26 exemplifies innovation in vehicle design, combining powerful performance, safety, and technology to meet the diverse needs of its users. Whether for commercial or personal use, the UVHB26 delivers a dynamic driving experience and remains a reliable choice for those looking for a high-performance vehicle.

CFM UVHB26 warranty Operating Instructions, First Firing, Lighting Instructions for Honeywell

Models: UVHB26