ASSEMBLY STEP 2

For Sectional and One-Piece Doors Only Install the Trolley

•

Attach the trolley threaded shaft to the trolley with

 

the lock washer and nuts as shown.

•

As a temporary stop, insert a screwdriver into the

 

hole in the front end of the rail.

•

Slide the trolley assembly along the rail to the

Lock Washer 5/16"

HARDWARE SHOWN ACTUAL SIZE

Lock Washer

Nut

5/16"

5/16"-18

Inner Nut 5/16"

screwdriver stop.

NOTE: If trolley hits against any nuts on the rail,

the bolts and nuts were attached from the wrong Trolley side and must be repositioned. Review Assembly

Step 1.

Temporary Stop

Screwdriver

Outer Nut

Trolley

Threaded

5/16"

Shaft

ASSEMBLY STEP 2

For Sliding and Swinging Gates Only Install the Trolley

•Attach the trolley threaded shaft to the trolley with the lock washer and nuts as shown.

•Insert a hex bolt into the hole in the front end of the rail.

•Slide the trolley assembly along the rail until it rests against the hex bolt (trolley stop).

NOTE: If trolley hits against any nuts on the rail, the bolts and nuts were attached from the wrong side and must be repositioned. Review Assembly Step 1.

Hex Bolt 5/16"-18x7/8"

Hex Bolt Trolley Stop

Lock Washer 5/16"

Nut 5/16"-18

HARDWARE SHOWN ACTUAL SIZE

Hex Bolt

Nut

Lockwasher

5/16"-18x7/8"

5/16"-18

5/16"

Inner Nut

Trolley

 

5/16"

Threaded

 

Outer Nut

Shaft

 

5/16"

 

 

 

Lock Washer

 

 

5/16"

 

 

 

Cable Pulley

 

 

Bracket

11