Chamberlain 1215E FS2, 1225E FS2 Planning (Continued), ONE-PIECEDOOR WITH TRACK, ONE-PIECEDOOR INSTALLATIONS, ONE-PIECEDOOR WITHOUT TRACK

Planning (Continued)ONE-PIECE DOOR INSTALLATIONS

•Generally, a one-piece door does not require reinforcement. If your door is lightweight, refer to the information relating to sectional doors in Installation Step 10.

•Depending on your door’s construction, you may need additional mounting hardware for the door bracket (Step 10).

WARNING

Without a properly working safety reversal system, persons (particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door.

•The gap between the bottom of the garage door and the floor MUST NOT exceed 6 mm. Otherwise, the safety reversal system may not work properly.

•The floor or the garage door MUST be repaired to eliminate the gap.

ONE-PIECE DOOR WITHOUT TRACK

Slack in Chain Tension is Normal When Garage Door is Closed

Header

Wall

FINISHED CEILING

Support bracket & fastening hardware is required. See page 21.

	Gap between floor and bottom
Safety	of door must not exceed 6 mm.

Reversing Sensor

(Optional Accessory)

		Motor Unit
Wall-mounted
Door
Control
Access	CLOSED POSITION
	Header
Door		Chain
	Bracket	Pulley	Chain
		Bracket Trolley
	Garage
	Door
	Spring		Manual
		Straight	Release
			Rope & Handle
Safety		Door
		Arm
Reversing Sensor
(Optional Accessory)		Curved
Header		Door
		Arm
Wall
	Door Bracket
Garage
Door

ONE-PIECE DOOR WITH TRACK

Safety Reversing

Sensor

(Optional Accessory)

Gap between floor and bottom of door must not exceed 6 mm

Access

Door

Wall-

Mounted

Door

Control

Safety Reversing

Sensor

(Optional Accessory)

CLOSED POSITION

	Cable	Trolley	Chain
Header	Pulley Bracket
Wall
	Header	Curved	Rail
	Bracket	Door Arm
Garage	Door	Straight
		Door
	Bracket
Door
		Arm
		Emergency Release
		Rope & Handle

5