Receiver and Remote Control Programming
Your garage door opener receiver and remote control have been
Your SECURITY✚ opener will operate with:
•several SECURITY✚ remote controls utilizing up to 8 functions.
•one SECURITY✚ Keyless Entry System.
Follow the instructions below to program your opener to match any additional remotes you may purchase. See Accessories on page 38.
To Add A Remote Control1.Press and hold a button on the remote to be programmed. See Figure 1.
2.Then press and release the Smart (learn) button on the opener panel, Figure 2. The indicator light on the panel will begin to blink and the opener light will flash once.
3.Release the remote push button.
Test by pressing the remote push button.
To Erase All Remote Control CodesPress and hold the Smart button on the opener panel for 6 seconds. The indicator light will turn on. Release the Smart button when it turns off. All codes are now erased from the opener. Then follow the steps above to
NOTICE: To comply with FCC rules, adjustment or modification of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the transmitter battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
WARNING
Children operating or playing with a garage door opener can injure themselves or others. The garage door could close and cause serious injury or death. Do not allow children to operate the door control(s) or remote control transmitter(s).
A moving garage door could injure or kill someone under it. Activate the opener only when you can see the door clearly, it is free of obstructions, and is properly adjusted.
Figure 1
SECURITY✚ Remote ControlPush button
Figure 2
SECURITY✚Garage Door Opener+
1 |
| 2 |
| 3 |
8 | 1 | 8 | 1 |
7 | 3 | 7 | 3 |
5 |
| 5 | + |
Kg |
| Kg |
Smart (learn) Indicator
Button Light
33