Chauvet 1-TRI IP user manual Reset Whites Setting White Calibration, Go to SET Rest

Operation

Reset

Whites Setting

White Calibration

Continued from previous page

This setting allows the user to reset the COLORado™ 1-Tri IP fixture to its default values, including the custom programs.

1)Go to SET> REST.

2)When prompted, enter the master access password as shown in Control Panel Lock.

3)Wait for the reset process to finish.

This setting allows the user to edit the temperature of the 11 white colors used in the Macros channel. The 11 pre-set whites are configurable.

1)Go to CAL1.

2)Select a white color (WT. 1~11).

3)Select a color (Red, Green, or Blue).

4)Select a color value (0~255).

5)Repeat for the other colors (Red, Green, or Blue).

6)Repeat for the other white colors (WT. 1~11).

This setting allows the user to select the white color shown by the COLORado™ 1-Tri IP when the color setting is RGBW and the DMX controller’s Red, Green, and Blue faders are set to “255”.

1)Go to CAL2 > RGBW.

2)Select a color (Red, Green, or Blue).

3)Select a color value (0~255).

4)Repeat for the other colors (Red, Green, or Blue).

-12- COLORado™ 1-Tri IP User Manual Rev. 01c