Chase Programming
A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory. See “Delete All Chases” for instructions.
CREATE A CHASE
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
Action
1)Press and hold the PROGRAM button for 3 seconds.
2)Press the CHASE (1~6) button you wish to program.
3)Change BANK if necessary to locate a scene.
4)Select the SCENE to insert.
5)Tap the MIDI/ADD button to store. All LED’s will flash 3 times.
6)Repeat steps 3 ~ 5 to add additional steps in the chase. Up to 240 steps can be recorded.
7)Press and hold the PROGRAM button for 3 seconds to save the chase.
Notes
COPY BANK INTO CHASE
Action
1)Press and hold the PROGRAM button for 3 seconds to enter programming mode.
2)Select the BANK to be copied using the BANK UP/DOWN buttons.
3)Press MUSIC/BANK COPY and Midi/Add buttons at the same time to copy.
4)Press and hold the PROGRAM button for 3 seconds to exit programming mode.
Notes
13 | Revised: |
