BEFORE YOU BEGIN

What is included

DMX-44 controller

DC 9-12V 500mA, 90V~240V Power Adapter

Manual with warranty card

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that

all parts are present, and have been received in good condition. Notify the shipper immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture

must be returned to the factory, it is important that the fixture be returned in the original factory box

and packing.

Safety Instructions

Please read these instructions carefully, which includes important

information about the installation, usage and maintenance?

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture.

This product is intended for indoor use only!

To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials close to the unit while operating.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.

Always disconnect from power source before servicing or replacing lamp or fuse and be sure to replace with same lamp source.

In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.

Don’t connect the device to a dimmer pack.

Make sure power cord is never crimped or damaged.

Never disconnect power cord by pulling or tugging on the cord.

Do not operate this device under 113° F ambient temperature conditions.

Caution!

There are no user serviceable parts inside the unit. Do not open the housing or attempt

 

any repairs yourself. In the unlikely event your unit may require service, please contact

 

CHAUVET.

DMX-44 User Manual

3

Revised: 2006-01-13 21:30:19

Page 3
Image 3
Chauvet DMX-44 user manual Before YOU Begin, What is included, Unpacking Instructions, Safety Instructions