Operating Instructions
AD D I NG A ST EP T O A C H ASE
Action
1)Press and hold the PROGRAM button for 3 seconds to enter programming mode.
2)Press the desired CHASE (1~6) button.
3)Press the TAPSYNC/Display and the LCD will display the scene and bank number. This displays the scene you will be adding.
4)Press the TAPSYNC/Display again and the LCD will display the chase you previously selected.
5)Use the BANK UP/DOWN buttons to scroll through the chase and arrive at the step number for which you would like to add or append a scene/step to.
6)Press Midi/Add button and one step number will be added to the previously displayed step number.
7)Press the SCENE button that corresponds to the scene to be copied.
8)Press Midi/Add button again to add the new step.
9)Press and hold the PROGRAM button for 3 seconds to exit programming mode.
Notes
DEL ET E A SC EN E/ST EP IN A C H ASE
Action
1)Press and hold the PROGRAM button for 3 seconds to enter programming mode.
2)Press the desired CHASE (1~6) button that contains the scene to be deleted.
3)Press the TAP DISPLAY button to switch the LCD display to steps.
4)Select the scene/step to be deleted using the BANK UP/DOWN buttons.
5)Press AUTO DEL button to delete the step/scene.
6)Press and hold PROGRAM button for 3 seconds to exit.
DEL ET E A C H ASE
Action
1)Press and hold the PROGRAM button for 3 seconds to enter programming mode.
2)Press the CHASE button (1~6) to be deleted.
3)Press and hold AUTO DEL button and the respective CHASE button then release to delete the chase. All LEDs will blink 3 times.
Notes
Remember that we use scene and steps interchangeably.
Notes
Scenes will remain programmed on the controller. Only the chase is affected.
12 | Revised: |
