Operating Instructions
DEL ET E AL L C H ASE PR OGR AM S
CUATION! This procedure will result in irrevocable loss of chase step memory. The individual scenes
and program banks will be preserved.
Action
1)Press and hold the BANK DOWN button and the AUTO DEL button while turning OFF the controller.
Notes
Playback (Scenes)
M ANU AL R UN SC EN E
When power is first turned ON, the controller will be in manual scene mode.
Action
1)Make sure neither Music Trigger nor Auto Trigger leds on the LCD display are on.
2)Select the program BANK that stores the scene you want to run manually by using the BANK UP/DOWN.
3)Press the SCENE button to run.
Notes
If by chance you are in programming mode you can also press and hold the PROGRAM button until the Program LED goes off.
RU NN ING I N SO UN D - M ODE
Action
1)Press the
2)Change BANK programs by using BANK UP/DOWN buttons if necessary.
3)Press the
Notes
In the Sound mode, programs will be triggered by the sound using its
RU NN ING I N AU T O - M OD E
Action
1)Press the AUTO DEL button until the Auto Trigger LED turns on.
2)Change BANK programs by using BANK UP/DOWN buttons if necessary.
3)You can adjust the time between steps by moving the SPEED fader and the duration of the step by moving the FADE TIME fader.
4)You can change Banks while in operation by using the BANK UP/DOWN buttons.
Notes
In the Auto mode, programs will be triggered by controllers fade and speed time as set on the faders. All scenes in a Bank will chase.
CAUTION! The fade setting should never be slower than the speed setting or the scene will never complete execution.
BL AC KO UT
The Blackout button brings all lighting output to 0 or off.
13 | Revised: |
