3. SETUP
AC Power
| This fixture has an |
| voltages. The only thing necessary to do before powering on the unit is to make sure the line voltage |
| you are applying is within the range of accepted voltages. This fixture will accommodate between |
| 100V and 240V AC |
| be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is |
| used solely for a 0% to 100% switch. |
| This fixture is designed for power linking from one COLORdash™ PAR to another COLORdash™ |
| PAR fixture. |
Warning! | All fixtures must be connected to circuits with a suitable Earth Ground. |
| Depending on the application, the lighting fixture may require a different connector Please refer to the |
| below wire color code if installing a new connector. |
Wire | Connection |
|
|
|
|
|
|
|
Brown | AC Live |
|
Blue | AC Neutral |
|
Green/Yellow | AC Ground |
|
Connection | Pin |
|
|
|
|
|
|
|
AC Live | 1 |
|
AC Neutral | 2 |
|
Ground(Earth) | 3 |
|
COLORdash™ Par User Manual | 8 | 9/4/2008 12:09 PM |