Setting the DMX address
Each fixture requires a "start address" from 1 to 512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start addresses so that the channels used do not overlap and note the start address selected for future reference. The COLORado™ Panel uses up to 9 channels of DMX. If this is your first time using DMX, we recommend reading the DMX Primer in the Appendix Section.
Control Panel Functions
All fixture functions and settings are accessible via the
BUTTON
MENU | ENTER | UP | DOWN |
FUNCTION
MENU | Exits from the current menu or function |
|
|
ENTER | Enables the currently displayed menu or sets the currently selected value in to the |
| selected function |
UP | Navigates upwards through the menu list and increases the numeric value when in |
| a function |
DOWN | Navigates downwards through the menu list and decreases the numeric value when |
| in a function |
|
|
Password Menu Lockout
The COLORdash™ PAR has a password
Note: This feature uses a default,
COLORdash™ Par User Manual | 15 | 9/4/2008 12:09 PM |