Panasonic CF53JBLZY1M Troubleshooting Useful Information Getting Started Appendix, „ Starting Up

„Starting Up

Other startup problems. z Press F9 in the Setup Utility (Î Reference Manual “Setup Utility”) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again.

zRemove all peripheral devices.

zCheck to see if there was a disk error.

A Remove all peripheral devices including an external display.

B Click (Start) - [Computer] and right-click [Local Disk (C:)], and click [Properties].

CClick [Tools] - [Check Now...].

• A standard user needs to enter an administrator password.

DSelect the option in [Check disk options] and click [Start].

EClick [Schedule disk check] and restart the computer.

AClick [start] - [My Computer] and right-click [Local Disk(C:)], and click [Properties].

BClick [Tools] - [Check Now].

CSelect the option in [Check disk options] and click [Start].

zStart the computer in Safe Mode and check the error details. When the [Panasonic] boot screen disappears*1 at startup, press and hold F8 until the Windows Advanced Options Menu is displayed. Select the Safe Mode and press Enter.

*1 When [Password on boot] is set to [Enabled] in the [Security] menu of the Setup Utility, [Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you enter the password and press Enter, press and hold F8.

„	Entering Password
Even after entering the		z The computer may be in ten-key mode.
password, password input		If the NumLk indicator lights, press				to disable the ten-key mode, and then input.
				NumLk
screen is displayed again.		z The computer may be in Caps Lock mode.
		If the Caps Lock indicator	lights, press		Caps Lock		to disable the Caps Lock
		mode, and then input.
		z The user name (account name) includes an “@” mark.
Cannot log on to Windows.		If another user account exists:
(“The user name or pass-		Log on to Windows using another user account, and delete the account that
word is incorrect” is dis-		includes “@”. Then create a new account.
played.)		If no other account exists:
		You need to reinstall Windows (Î page 19).
„	Shutting down
Windows does not shut		z Remove the USB device and the ExpressCard.
down.		z Wait one or two minutes. It is not a malfunction.

„Display

No display.	z The external display is selected. Press		+		or			*2 to switch the display.
		Fn		F3		+	P

Wait until the display has been switched completely before pressing Fn + F3 or + P*2 again.

zWhen using an external display,

•Check the cable connection.

•Turn on the display.

•Check the settings of external display.

zThe display is turned off by the power-saving function. To resume, do not press the direct selection keys, but press any other key like Ctrl.

zThe computer entered sleep ( ) /standby ( ) or hibernation by the power-saving function. To resume, press the power switch.

*2 Windows 7 only

Troubleshooting Useful Information Getting Started

Appendix

23