Panasonic CF53JBLZY1M, CF-53 appendix Compatible AC cord

*25

*26

*27

*28

*29

*30

*31

*32

*33

Does not guarantee operation of all HDMI-compatible periph- erals.

Only for model with IEEE 1394a interface. Only for model with Fingerprint reader. Only for model with Web Camera

<Only for North America>

The AC adaptor is compatible with power sources up to 240 V AC adaptor. This computer is supplied with a 125 V AC

compatible AC cord. 20-M-2-1

Measured with LCD brightness : 60 cd/m2

Varies depending on the usage conditions, or when an optional device is attached.

Varies depending on the usage conditions, CPU speed, etc.

Approx. 0.5 W when the battery pack is fully charged (or not being charged) and the computer is off.

<When using with 115 V AC>

Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.2 W) simply by having the AC adaptor plugged into an AC outlet.

Rated power consumption. 23-E-1

*34

*35

*36

*37

*38

*39

*40

*41

*42

Do not expose the skin to this product when using the prod- uct in a hot or cold environment. (Î page 8)

When using in hot or cold environment, some peripherals may fail to work properly. Check the operation environment of the peripherals.

Using this product continuously in a hot environment will shorten the product life. Avoid use in these types of environ- ments.

When using in low temperature environment, startup may become slow or battery operation time may become short. The computer consumes power when the hard disk is warm- ing up during startup. Therefore, if you are using battery power and the remaining power is low, the computer may not start up.

When reinstalling Windows using the data of the recovery area on the hard disk, you can select the OS to be installed (either Windows 7 (32-bit) or Windows 7 (64-bit)). An OS that has been installed at the time of purchase or an OS that has been installed using the hard disk recovery function or the recovery disc can be supported.

The downgrade service is available only for corporate users who fulfill certain conditions.

Must be installed before use.

Perform on the recovery partition. (If this software can not be performed on the recovery partition, perform from the recov- ery disc)

For information on Wireless Manager, refer to the “Supple- mentary Instructions for Wireless Manager mobile edition 5.5” by the following procedure.

Click (Start) and input “c:\util\wlprjct\Sup-

plementary Instructions.pdf” in [Search programs and files] and press Enter.

Click [start] - [Run] and input “c:\util\wlprjct\Supplementary Instructions.pdf” and click [OK].

These are speeds specified in IEEE802.11a+b+g+n stan- dards. Actual speeds may differ.

Available when set to “WPA-PSK”, “WPA2-PSK” or “none”.

Only available when HT40 enabled by the computer and access point which associated supports HT40.

Troubleshooting Useful Information Getting Started

Appendix

31