Mounting
Orientation
This fixture may be mounted in any safe position.
Rigging
The fixture includes a mounting yoke to which a rigging clamp can be attached. You must supply your own clamp and make sure the clamp is capable of supporting the weight of this fixture. You can order “C” and
Note: There are 2 types of applications for this fixture: floor stand for up lighting, and overhead use for down lighting. If you are using this fixture for up lighting, then you must use at least 1 safety cable/chain for each fixture in addition to the mounting brackets.
If hanging the fixture for over head use, then please follow the below steps.
1. Block access below the work area and use suitable and stable platform when installing or servicing fixture.
2. Safety cables must always be used, secured through the heat sink ventilation passageway. The safety cable must be capable of holding 10 times the weight of the fixture.
3. Verify the structure can hold 10 times the weight of all
Caution! | After prolonged periods of operation, the fixture chassis may reach high |
| temperatures. This fixture must be mounted in a ventilated location, as it uses |
| forced convection cooled. |
Hanging Bracket/
Floor Stand
Hanging Clamp
Note: sold separately
Barn Doors
COLORdash™ Par User Manual | 9 | 9/4/2008 12:09 PM |
