Setup

Mounting Before mounting this product, read and follow the Safety Notes.

Orientation Always mount this product in a safe position. The OVATION™ E-190WW may be mounted in any position; however, make sure there is adequate room for ventilation, configuration, and maintenance.

Rigging CHAUVET®product. recommends using the following general guidelines when mounting this

When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.

Make sure to mount this product away from any flammable material as indicated in the Safety Notes.

Never mount in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect the product.

If hanging this product, make sure that the mounting location can support the product’s weight. See the Technical Specifications for the weight-bearing requirements of this product.

When hanging this product, always secure to a fastening device using a safety cable (included).

Procedure The OVATION™ E-190WW comes with a hanging/mounting bracket to which you can attach mounting clamps. The bracket has 13-mm holes, which are appropriate for this purpose. You must supply your own mounting clamps, so be sure the clamps are capable of supporting the weight of this product. Use at least one mounting point per product where necessary.

Mounting Clamp

(works with CLP-15or CLP-15N

clamp from CHAUVET®)

Hanging/Mounting

Bracket

Alternative Yoke

Attachment

Mounting Diagram

 

 

Safety Cable

 

 

(works with CH-05

Bracket

Adjustment

 

cable from CHAUVET®)

Hand Shank

 

 

Secure the safety

 

 

cable using the

 

passageway on the

 

top of the product

Overhead Mounting

Alternate Short Mounting

-8-

OVATION™ E-190WW User Manual Rev. 3

Page 12
Image 12
Chauvet E-190WW user manual Overhead Mounting, Mounting Diagram