
Technical Information
5. Technical Information
Product
Maintenance
Dust
To clean your product, follow the instructions below.
∙Unplug the product from power.
∙Wait until the product is at room temperature.
∙Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external vents and components.
∙Clean all external surfaces with a mild solution of
∙Apply the solution directly to a soft,
∙Wipe any dirt or grime to the outside edges of the lens surface.
∙Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Cleaning the Reflector
Housing Lens
|
| Framing Shutter |
| Beam Focus | |
|
| (x 4) |
| Knobs | |
Barrel | |||||
|
|
|
| ||
|
|
|
| ||
Rotation |
|
|
|
| |
Knobs |
|
|
|
|
Lens Tube
(sold separately)
|
| Barrel |
|
| Assembly |
Reflector | ||
Housing |
|
|
The lens inside the reflector housing may need periodic cleaning. To gain access to this lens, do the following.
1.Separate the reflector housing from the barrel assembly by unscrewing the barrel rotation knobs.
2.Use a Phillips screwdriver to remove the lens from its fixed cover, if necessary.
3.Clean the lens as described in Product Maintenance.
Take great care not to damage the LEDs and circuit board, which will now be exposed inside the reflector housing.
To remove the lens tube (sold separately), unscrew the beam focus knobs. Follow any maintenance and cleaning instructions supplied with the lens tube.
Always close the framing shutters when transporting or storing the product.
OVATION™ |