Chapter

3

SUPER PRO GUN

Gun Block Assembly 5104-00-01

See Figs. 9.9 - 9.12 for exploded schematic drawings

Flush Valve Assembly

1.Install the 7301-11-008 (O-Ring) onto the 5104-25-1(Flush Valve Button).

2.Install the 7301-3-007 (O-Ring) onto the 5104-23-1 (Flush Seal Body).

3.Install the 9203-2-3 (Compression Spring) into the 5104-24-1 (Flush Valve Body).

4.Smear 6706-2-1 (White Grease) onto the 5104-25-1 (Flush Valve Button), and the 5104-23-1 (Flush Seal Body). Thread the Flush Valve Button through the 9203-2-3 (Compression Spring) located in the 5104-24-1 (Flush Valve Body), and screw on and tighten the Flush Seal Body.

5.Install the 5104-26-1 (Flush Valve Seal) onto the 5104-24-1 (Flush Valve Body) and thread through the 5104-22-1 (Flush Valve Neck).

6.Install the 5104-02-01 (Flush Elbow Assembly) onto the 5104-22-1 (Flush Valve Neck).

7.Install the 5104-21-1 (Flush Valve Split Seal) onto the 5104-24-1 (Flush Valve Body).

SUPER PRO GUN &

7

SUPER PRO GUN II

 

Page 12
Image 12
Roper M6707-1-1 manual Gun Block Assembly, Flush Valve Assembly, See Figs .9 9.12 for exploded schematic drawings