7.Remove and discard the 5105-9-1 (Trigger Nut Seal), and the 7304-4-1 (Lip Seal) from the 5105-10-1 (Trigger Nut)
NOTE
Discardallpartstobereplacedbyrepairkit. Allremainingpartsshouldbe thoroughlycleaned,inspectedfordamage,andreplacedifnecessary.
SUPER PRO GUN II
Handle Disassembly 5110-7-1
See Figs. 9.5 & 9.6 for exploded schematic drawings
1.Remove and discard the 5110-6-1 (Cylinder Gasket), and the 5105-6-1(Toggle Washer) from the 5110-1-1 (Porting Plate).
2.Remove the 5110-1-1 (Porting Plate) from the 5110-7-1 (Gun Handle).
3.Remove the 5110-5-1 (Handle Gasket) and the 5110-2-1 (Slide Valve).
NOTE
Fortwostagetrigger,choppergunhandleonly. Removethe5110-3-1 (DetentPlate).
Remove the 9203-2-1 (Compression Spring) from the 5110-7-1 (Gun Handle). Discard the Gun Handle Gasket and Compression Spring.
4.Remove the two 7102-8-8 (Slotted Pan HD Mach Screws) to remove the 5105-2-1 (Trigger Guard).
5.Remove 7102-10-12 (Slotted Flat Head Screw), and slide the 5105-15-01 (Pivot Plate) out from under the 5110-4-1 (Trigger Stem).
6.Remove the 5105-10-1 (Trigger Nut) from the 5110-7-1 (Gun Handle).
7.Remove and discard the 5105-9-1 (Trigger Nut Seal), and the 7304-4-1 (Lip Seal) from the 5105-10-1 (Trigger Nut)
NOTE
Discardallpartstobereplacedbyrepairkit. Allremainingpartsshouldbe thoroughlycleaned,inspectedfordamage,andreplacedifnecessary.
