20.Install the 5104-11-1 (Actuating Stem) into the 5104-2-1 (Valve Rod).
NOTE
UseremovablestrengththreadlockingcompoundonActuatingStemthreads.
21.Actuate the 5104-11-1 (Valve Stem) back and forth 3 or 4 times, then snug both 5104-8-1 (Packing Nuts) with 9301-2-3 (Packing Bit) until firm. Again, actuate the Valve Stem back and forth 3 or 4 times.
22.Install the 5104-32-1 (Plug), and the 7301-15-125 (O-Ring) in the port provided on the catalyst side of the 5104-1-1 (Gun Block).
23.Install the 5104-32-1 (Plug) into the flush port on the resin side of the 5104-1-1 (Gun Block). See Fig. 3.7
Fig. 3.7
24.Install the 5104-27-1 (Catalyst Fitting), and the 7301-10-903 (O-Ring) onto the 5104-1-1 (Gun Block).
25.Install the 5104-9-1 (Resin Fitting) and the 7301-14-904 (O-Ring) onto the 5104-1-1 (Gun Block).
26.Insert the 5104-03-01 (Injector Assembly) and 5104-17-1 (Distribution Ring) into the 5104-20-1 (Mix Housing).
12 | SUPER PRO GUN & |
| SUPER PRO GUN II |
