Chapter

7

SUPER PRO GUN

Gun Block Disassembly 5104-00-01

See Figs. 9.9 - 9.12 for exploded schematic drawings

1.Remove the four 5106-6-1 (Mounting Screws), and the four

5106-3-1 (Mounting Seals) to remove the 5104-00-01 (Gun Block Assembly) from the 5106-00-01 (Gun Actuator Assembly).

2.Remove the two 7102-1-6 (Socket Head Cap Screws) to remove the 5104-20-1 (Mix Housing) from the Gun Block Assembly.

3.Remove the 5104-12-1 (Mix Housing Seal), and the 5104-17-1 (Distribution Ring) from the 5104-20-1 (Mix Housing).

4.Remove the 5104-03-01 (Injector Assembly), from the Gun Block Assembly.

5.Remove the 5104-32-1 (Plug) from the 5104-1-1(Gun Block).

6.Remove the 5104-32-1 (Plug), and the 7301-15-125 (O-Ring) from the 5104-1-1 (Gun Block).

7.Remove the 5104-9-1 (Resin Fitting), and the (7301-14-904 (O-Ring) from the 5104-1-1 (Gun Block).

8.Remove the 7701-3-6 (Catalyst Fitting), and 7301-10-903 (O-Ring), from the 5104-1-1 (Gun Block).

9.Remove 5104-11-1 (Actuating Stem) from the 5104-2-1 (Valve Rod).

10.Remove both 5104-8-1(Packing Nuts) from the 5104-1-1 (Gun Block).

11.Gently tap the 5104-2-1 (Valve Rod) from Gun Block using the 9301-5-1 (Seal-Installation Tool).

12.Remove 5104-10-1 (Center Spacer).

22

SUPER PRO GUN &

 

SUPER PRO GUN II

Page 27
Image 27
Roper M6707-1-1 manual Gun Block Disassembly, See Figs .9 9.12 for exploded schematic drawings