Roper M6707-1-1 manual Rubber Roll Adjustment

7.Slide Rubber Roll Assembly toward the 5103-03-01 (Wedge Rotor Assembly) and tighten the 7102-2-20 (Socket Head Cap Screw)

Rubber Roll Adjustment

1.Slightly loosen the 7102-2-20 (Socket Head Cap Screw), just enough so the Rubber Roll Assembly will slide in the T-Slot. See Fig. 4.6.

Fig. 4.6

2.Apply slight pressure of the Rubber Roll Assembly to the

5103-03-01 (Wedge Rotor Assembly), and tighten the 7102-2-20 (Socket Head Cap Screw).

NOTE

Whenmakingthisadjustment,RubberRollmustnotbeincontactwith

ChopperBlade.

SUPER PRO GUN &	17
SUPER PRO GUN II