Roper M6707-1-1 manual SuperCutter Disassembly, Rubber Roll Disassembly

Chapter

8

SUPER PRO GUN

SuperCutter Disassembly

5103-00-01

See Figs. 9.13 - 9.20 for exploded schematic drawings

1.Unscrew the 5103-14-1 (Cover Nut) and remove the 5103-13-1 (Chopper Cover) from the 5103-00-01 (Roving Cutter Basic Assembly).

The remainder of the disassembly covered in this manual pertains to the rubber roll and the rotor.

Rubber Roll Disassembly

2.To remove the Rubber Roll Assembly, loosen the 7102-2-20 (Socket Cap Screw) enough to slide the 5103-4-1 (Slide Adjust Nut) from the slot in the 5301-1-1 (Base Plate)

3.With a screw Driver, remove the 7205-3-31 (E-Ring), and slide the 5103-6-1 (Rubber Roll) off the 5403-5-01 (Mandrel Assembly).

24	SUPER PRO GUN &
	SUPER PRO GUN II