General Troubleshooting
Symptom
Solution(s)
Auto shut off | Check fan thermal switch reset |
|
|
Breaker/Fuse keeps | Check total load placed on device |
blowing |
|
Device has no power | Check for power on Mains. |
| Check device’s fuse. (internal and/or external) |
Fixture is not | Check DMX settings for correct addressing |
responding | Check DMX cables |
| Check polarity switch settings |
Fixture is on but there | Make sure you have the correct audio mode on |
is no movement to the | Adjust sound sensitivity knob |
audio |
|
Light will not come on | Some discharge lamps require a cooling off period |
after power failure | before the electronics in the fixture can kick start it |
| again, wait 5 to 10 minutes before powering up |
Loss of signal | Use only DMX cables |
| Install terminator |
| Note: Keep DMX cables separated from power |
| cables or black lights. |
No light output | Check fuse |
| Call service technician |
|
|
If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support at the location below.
Contact Us
World W ide
General Information | CHAUVET | |
| 3000 North 29th Court | |
| Hollywood, FL 33020 | |
| voice: | 954.929.1115 |
| fax: | 954.929.5560 |
| toll free: 800.762.1084 | |
Technical Support | CHAUVET | |
| 3000 North 29th Court | |
| Hollywood, FL 33020 | |
| voice: | 954.929.1115 (Press 4) |
| fax: | 954.929.5560 (Attention: Service) |
World Wide Web | www.chauvetlighting.com | |
COLORstrip™ Mini User Manual | 15 | 1/26/2010 2:49 PM |
