|
| F = Green |
|
| C = Blue |
022 | Color fade | P = Run speed |
DMX Control Mode
Operating in a DMX Control mode environment gives the user the greatest flexibility, when it comes to customizing or creating a show. In this mode, you will be able to control each individual trait of the fixture and each fixture independently.
Daisy Chain Connection
1.Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture.
2.Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output, as stated above, to the input of the following fixture and so on.
Universal DMX Controller
DMX Input | DMX Output |
3 Pin XLR DMX cable
You can use the
Master/Slave link to
control multiple units as one DMX device. Read the instructions on the following page.
Continue…
DMX mode setup
1.Press the Mode button, until the display reads [SYS]; then, press Enter.
2.Press the Up/Down buttons until the display reads [S dAd]; then press Enter.
3.Set the DMX address value by using the Up/Down buttons. Press Enter.
4.Press the Mode button.
COLORstrip™ Mini User Manual | 13 | 1/26/2010 2:49 PM |
