HP TippingPoint Next Generation Firewall manual Src-nat, Vpn, Enters source NAT context mode

Valid entries at this position are:

authtrap	Configure SNMP	authentication failure trap
community	Configure SNMP	read-only community
delete	Delete file or	configuration item
engineID	Configure SNMPv3 engine ID
help	Display help information
snmp	Enable or disable SNMP
trapsession	Configure a trap/inform
username	Configure SNMPv3 USM read-only user

Related commands running-snmp Context Commands

src-nat

Enters source NAT context mode.

Syntax src-nat Example NGFW{running}src-nat NGFW{running-snat}help Valid commands are:

delete rule allSRCNATRULEID help [fullCOMMAND]

rule (autoSRCNATRULEID) [POSITION_VALUE]

NGFW{running-snat}?
Valid entries at this position are:
delete	Delete source NAT	rule(s)
help	Display help information
rename	Rename source NAT	rule
rule	Create or enter a	rule context

Related commands running-snat Context Commands

vpn

Enters VPN context mode.

Syntax

vpn ipsec Example NGFW{running}vpn ipsec NGFW{running-ipsec}help Valid commands are:

delete log vpn CONTACT-NAME delete phase1 proposal (allNAME) delete phase2 proposal (allNAME) delete policy (allNAME)

delete pre-shared-keys (allA.B.C.DX:X::X:XHOSTNAME) [vrf-id IDany] delete retransmit-timeout

delete retransmit-tries delete trust (allCANAME) delete user

NGFW Command Line Interface Reference 81