HP TippingPoint Next Generation Firewall manual Running-agglinkX Context Commands

Example

NGFW{running-addressgroups-mygroup1}group mygroup2

NGFW{running-addressgroups-mygroup1}ipaddress

Apply IPv4 or IPv6 address.

Syntax

ipaddress (A.B.C.DA.B.C.D/MX:X::X:XX:X::X:X/M)

Example

NGFW{running-addressgroups-mygroup1}ipaddress 192.168.1.1

NGFW{running-addressgroups-mygroup1}ipaddress 192.168.1.0/24

NGFW{running-addressgroups-mygroup1}range

Apply IPv4 or IPv6 address range.

Syntax

range (A.B.C.D A.B.C.D)(X:X::X:X X:X::X:X)

Example

NGFW{running-addressgroups-mygroup1}range 192.168.1.100 192.168.1.200

running-agglinkX Context Commands

NGFW{running}interface agglink0

NGFW{running-agglink0}arp/ndp

Enable or disable ARP and NDP on interface.

Syntax

arp/ndp (enabledisable)

Example

NGFW{running-agglink0}arp/ndp enable

NGFW{running-agglink0}autoconfv6

Enable or disable IPv6 auto-configuration on interface.

Syntax

autoconfv6 (enabledisable)

Example

NGFW{running-agglink0}autoconfv6 enable

NGFW{running-agglink0}bind

Bind agglink network interface over specific ethernet or bridge port.

Syntax

bind PORT mode (passivestaticactive) [priority PRIORITY]

Port priority: (0-65535) default 32768, lowest value has highest priority

94 Edit Running Configuration Commands