HP TippingPoint Next Generation Firewall manual NGFWrunning-snmpdelete, NGFWrunning-snmpengineID

COMMUNITY	Text to identify	SNMP system community
SOURCE	IP (A.B.C.DX:X::X:X), subnet (A.B.C.D/MX:X::X:X/M), or "default"
default	allow any IPv4/6	source

Example

NGFW{running-snmp}community mycommunity default

NGFW{running-snmp}delete

Delete file or configuration item.

Syntax

delete community (COMMUNITYall)

delete trapsession ((A.B.C.DX:X::X:XFQDN) ver VERSION)all) delete username (USERNAMEall)

Valid entries:
community	Delete SNMP read-only community
trapsession	Delete	a	configured trap	session
username	Delete	a	configured user

Example

NGFW{running-snmp}delete community mycommunity

NGFW{running-snmp}delete community all

NGFW{running-snmp}delete trapsession 192.168.1.1 ver 3

NGFW{running-snmp}delete trapsession all

NGFW{running-snmp}engineID

Configure SNMPv3 engine ID.

Syntax

engineID ENGINE-ID

ENGINE-ID SNMPv3 Engine ID (1-32 hex octets, ex: 0x800012ef0302a11aab33f4)

Example

NGFW{running-snmp}engineID 0x800012ef0302a11aab33f4

NGFW{running-snmp}snmp

Enable or disable SNMP.

Syntax

snmp (enabledisable)

Example

NGFW{running-snmp}snmp enable

NGFW{running-snmp}trapsession

Configure SNMP v2c or v3 trap destinations.

Syntax

trapsession (A.B.C.DX:X::X:XFQDN) [port PORT] ver 2c COMMUNITY [inform]

trapsession (A.B.C.DX:X::X:XFQDN) [port PORT] ver 3 USERNAME level noAuthNoPriv [inform]

NGFW Command Line Interface Reference 235