HP TippingPoint Next Generation Firewall Running-rip Context Commands, NGFWrunning-ripdelete

Valid entries:

enable	Enable filter rule
THRESHOLD	Set threshold (0-100)
ACTIONSET	Apply action set name
disable	Disable filter rule

Example

NGFW{running-rep-abc}filter "myrepgroup" enable NGFW{running-rep-abc}filter "myrepgroup" enable 0 "Block + Notify"

NGFW{running-rep-abc}ip-except

Add IP address exception.

Syntax

ip-except SOURCEIP DESTINATIONIP

SOURCEIP	A.B.C.D	or	A.B.C.D/M	or	X:X::X:X	or	X:X::X:X/M
DESTINATIONIP	A.B.C.D	or	A.B.C.D/M	or	X:X::X:X	or	X:X::X:X/M

Example

NGFW{running-rep-abc}ip-except 192.168.1.1 192.168.2.2 NGFW{running-rep-abc}ip-except 2001:2:0:0:0:0:0:0/48 2001:db8:0:0:0:0:0:0/32

running-rip Context Commands

NGFW{running}router rip

NGFW{running-rip}default-metric

Set default metric for imported routes.

Syntax

default-metric (1-16) Example NGFW{running-rip}default-metric 2

NGFW{running-rip}delete

Delete file or configuration item.

Syntax

delete default-metric (1-16) delete distance (1-255) delete equal-cost (2-255)

delete passive-interface INTERFACE

delete redistribute (connectedospfstaticbgp) delete timers basic

delete triggered-updates delete version (12)

	Valid entries:
	default-metric	Reset default metric for imported routes
	distance	Reset administrative distance for routes learned via RIP to
		default
	equal-cost	Reset equal-cost to default
	passive-interface	Enable RIP routing updates on an interface
	redistribute	Delete redistribute routes from another routing protocol
	timers	Reset basic RIP timers to default
218	Edit Running Configuration Commands