NETGEAR WNDR4500 Default DMZ Server, Change the MTU Size,  To set up a default DMZ server

Models: WNDR4500

1 130
Download 130 pages 47.91 Kb
Page 33
Image 33

N900 Wireless Dual Band Gigabit Router WNDR4500

Default DMZ Server

The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation (NAT). The router is programmed to recognize some of these applications and to work correctly with them, but there are other applications that might not function well. In some cases, one local computer can run the application correctly if that computer’s IP address is entered as the default DMZ server.

WARNING:

DMZ servers pose a security risk. A computer designated as the default DMZ server loses much of the protection of the firewall and is exposed to exploits from the Internet. If compromised, the DMZ server computer can be used to attack other computers on your network.

Incoming traffic from the Internet is usually discarded by the router unless the traffic is a response to one of your local computers or a service that you have configured in the Port Forwarding/Port Triggering screen. Instead of discarding this traffic, you can have it forwarded to one computer on your network. This computer is called the default DMZ server.

To set up a default DMZ server:

1.On the WAN Setup screen, select the Default DMZ Server check box.

2.Type the IP address.

3.Click Apply.

Change the MTU Size

The Maximum Transmission Unit (MTU) is the largest data packet a network device transmits. When one network device communicates across the Internet with another, the data packets travel through many devices along the way. If any device in the data path has a lower MTU setting than the other devices, the data packets have to be split or “fragmented” to accommodate the device with the smallest MTU.

The best MTU setting for NETGEAR equipment is often just the default value, and changing the value might fix one problem but cause another. Leave MTU unchanged unless one of these situations occurs:

You have problems connecting to your ISP or other Internet service, and the technical support of either the ISP or NETGEAR recommends changing the MTU setting. These web-based applications might require an MTU change:

-A secure website that will not open, or displays only part of a web page

-Yahoo email

-MSN portal

-America Online’s DSL service

NETGEAR genie Advanced Home

33

Page 33
Image 33
NETGEAR WNDR4500 user manual Default DMZ Server, Change the MTU Size,  To set up a default DMZ server