![](/images/new-backgrounds/1264391/264391119x1.webp)
N900 Wireless Dual Band Gigabit Router WNDR4500
Control Center Configuration
Select Tools >Configuration to display the following screen:
Automatically execute when logging on Windows. Enable this utility to start automatically when you are logged in to Windows.
Timeout. Specify the timeout value for holding the USB resource when it is not in use.
Language. Select the display language for this utility.
USB Printer
The first time you use a printer, you need to click Connect. You might be asked to install the driver for this printer. After the driver is installed, the printer status changes to Available.
Note: Some USB printers (for example: HP and Lexmark printer) request that Do not connect the USB cable until you are prompted by the installation software in their installation.
If the USB printer is detected and connected automatically, you need to disconnect the printer, and then wait for the prompt asking you to click Connect.
ReadySHARE Printer
60